ATTENTION 1. We provide more detailed operations through videos and product descriptions. If you have any questions during your usage please feel free to contact us. 2. For materials that do not withstand high temperature please adjust temperature and time in baking flexibly during the actual operation. The principle is to not exceed the maximum temperature that the object itself can withstand. 3. Large objects that are inconvenient to be placed in the oven can be dried naturally. How to Use: Step 1-Use inkjet printer let paper dry after printing. Step 2-Spray an even coat of the acrylic spray over your image. Allow it to dry for at least 10 minutes. Step 3-Cut out image leave 2 ~ 3mm of spacing. Step 4-Submerge paper into water for 30 ~ 60 seconds to make the base paper and transfer membrane separated. Quickly apply it to your clean decal surface position it and then press firmly. Step 5-Remove air bubbles and excess water fully then slide the backing off. Step 6-Let the decal set and dry at least 3 hours. Ceramics need to be baked in an oven at 230℉ (110℃) for 10 ~ 15 minutes.