*The head back and sides of this acoustic violin are all made from basswood *The bow is made from arbor and white horse tail *This set includes violin case bow and rosin *Age: Above 11 Years Old Material: Back & Side & Face: Basswood Tailpiece: Aluminium Alloy Top & Bridge: Maple Chin Rest & Tuning Peg & End Pin: Blacked Wood Violin Bow: Arbor Size: Violin Length: 59cm Bow Length: 29.13 / 74cm Weight: 48.18oz / 1366g Rosin Dimensions: (1.89 x 1.22 x 0.63) (L x W x H) Panel Dimensions: (14.02 x 8.27 x 2.76) (L x W x H) Violin Dimensions: (23.43 x 8.27 x 2.76) (L x W x H) Case Dimensions: (31.30 x 10.04 x 4.72) (L x W x H) Note: 1. When you receive the violin please notice that the bridge is wrapped in paper and stowed underneath the tailpiece. Don t discard it. It should be installed in the middle of the two F Holes. 2. When you receive the bow and the hairs are loose don t worry. Use the screw to tighten the frog so that the hair has tautness. 3. When you find that part of the bow hair is broken it is normal please cut off the broken part and the bow can be used normally. 4. Be careful to not over tighten your bow. The hair should have a slight bounce to it without touching the stick after placing it on the strings. Usually about 1/4 of an inch distance from the low point of the curve to the hair is ideal. 5. Hold the rosin with your index finger and thumb and thus tighten up the bow evenly smear the rosin on the bowstring up and down. Suggested use: before smearing rip a trace on rosin to make it powdery for quick and even smearing. Try to keep your hands away from rosin or pad with a tissue while smearing; otherwise it will become too sticky to clean. 6. If the string falls out don t worry it can be reinstalled please consult customer service.